Installation instruction for Shades
Step 1
Before installing your shade, make sure all parts listed below are present. If any part is missing or damaged, please do not assemble, install, or operate
Brackets
2-3
Screw
4-6
Screw bracket
4-6
Handle
1
Step 2: Gather Additional Tools Required
The following tools are not included, but will be needed to complete your installation.
Screwdriver
Level
Pencil
Step Ladder
Step 3: Begin Installation
Measure & Mark location of shade and brackets
Outside Mount
Note that the shade may be installed either inside or outside the window frame.
Tip: Make sure mounting brackets and/or mounting surface are level, otherwise your shade
could telescope during the lifting operation
Step 4: Drill Hole & Screw In Brackets
Step 5: Mount shade in the brackets
Side View Hang back of headrail channel onto the back of the clip. Rotate headrail forward and up
Clips will click when secure
Clips will click when secure
Step 6: Assembling the operation handle
Locate handle in the center of bottom rail.
Operate the shade with standard lift.
- Choosing a selection results in a full page refresh.